Basalte d'Islande
Prix TTC
Thickness
De 10 à 85 mm
Surface
1,38 m²
Color
none
DIMENSIONS
Effective Size : 1390 x 980 mm
Overall : 1723 × 1120 mm
Packaged : 1900 x 1200 x 110mm
THICKNESS
from 10 to 85 mm
WEIGHT
13 kg per pannels (9,5 kg/m²)
Coverage Area
Each panel covers a surface area of 1,38 m².
USAGE
Designed for interior use, the panel is moisture-resistant and suitable for spaces such as kitchens or bathrooms. However, it is not recommended for use as a backsplash or inside a shower cabin, where frequent cleaning and harsh detergents may damage the surface. For installations near a heat source (fireplace, stove), please ensure safety distances and the appliance manufacturer’s recommendations are strictly followed.
LAYOUT
The Óros collection features an interlocking panel designed to fit together like a puzzle. You can assemble as many as needed, either horizontally or vertically, depending on your design preferences.
To ensure a natural look and minimize pattern repetition, we recommend not covering more than ten square meters in a single continuous section. In such cases, it is best to split the surface or incorporate a visual break.
Each panel is hand-painted: they are all unique and may feature slight variations in shade or texture.
COMPOsition
Our panels feature a mineral resin surface that ensures an unparalleled quality of finish. This eco-friendly resin preserves the authentic, natural touch of stone.
The core is made of high-density rigid foam lightweight yet durable offering valuable thermal and acoustic insulation performance.
ORIGIN
Each panel is handcrafted in our Auvergne workshop using our patented process.
Thermal Insulation
Each panel provides a thermal insulation boost equivalent to an average of 10 cm of glass wool. While not a substitute for standard full-scale insulation, it offers a significant thermal advantage in a world where every small step contributes to environmental impact.
ACOUSTICS
Thanks to their deep, irregular relief, our panels reduce resonance, enhance sound diffusion, and strengthen acoustic insulation between spaces.
How to Install
Our panels are secured using our MS polymer adhesive cartridges. They can be installed on most surfaces, including concrete, drywall, wood, tiles, OSB, and more.
CUTTING
Voici une traduction technique et précise qui respecte les spécificités de votre outillage et vos recommandations de finition.
Traduction Premium
Panels can be cut using a jigsaw (or a reciprocating saw). Use a blade with a cutting depth greater than 85 mm. We recommend using a carbide or diamond blade, as mineral resin is highly abrasive. Alternatively, have several wood blades on hand.
The cutting process may cause minor chipping on the visible surface. We recommend using our Touch-up Kit paint for a professional, seamless finish.
Recommended products: Jigsaw blade - KOPTÔ, Joints & Finishes - Touch-up kit
Jointing
For interior installations, jointing is optional. For complete sealing (either for aesthetics or functionality), you can apply a bead of adhesive around the perimeter during installation, and a finishing joint between panels using the Touch-up Kit.
For the wall’s outer edges (sides, floor, ceiling), a standard acrylic sealant is also suitable. Note: the paint from the Touch-up Kit can be used to tint an acrylic sealant for a perfect color match.
Recommended products: Adhesive Cartridge - KÓLLA, Joints & Finishes - Touch-up kit
Edges & Corners
If the panel ends at a wall edge (exposed wall) or in the middle of a wall (partial wall), treat the edges with the Touch-up Kit to cover the visible foam core.
For a 90° outside corner, make a 45° miter cut using a blade with a depth ≥ 130 mm (e.g., T1044DP), then finish with the Touch-up Kit.
Dusting
Use a slightly damp sponge or a vacuum cleaner with a brush attachment. Avoid using dry cloths, as they may snag on the rough, natural textures of the relief.
Repairs & Touch-ups
In the event of a chip or impact, a Touch-up Kit is available. It allows for quick and discreet repairs, eliminating the need for replacement.
cleaning
In case of stains or dirt, clean with a soft sponge and soapy water. Do not use abrasive products, solvents, or aggressive detergents.
Configurator
Use our online calculator to estimate how many panels you need for your project. It accounts for cut lines and optimises the layout to ensure full coverage.
To use it, simply enter your project’s net surface area. The calculator will automatically determine the required number of panels.
The white outline represents your actual wall area. Any parts extending beyond it are offcuts.
If some areas inside the outline appear uncovered, that’s normal. It means you’ll use the offcuts from the opposite side to complete the wall.
Waste optimization
If you notice in the calculator that there are a lot of offcuts, here are a few tips to reduce waste and potentially lower the number of panels needed:
• Raise the bottom of the wall with a base plinth.
• Create a side frame in wood or plasterboard with a thickness equal to or greater than the panel, and recess the stone-effect surface into the wall.
• Use our adhesive sealant and touch-up kit to fill small gaps under 1 cm.
Lead time
Our panels are made to order. Shipping usually takes between 3 and 4 weeks.
Each panel is carefully packed in an individual cardboard box. For orders of more than a few units, delivery is typically made on a pallet.
Shipping Costs
Free delivery in mainland France for orders of 9 panels or more.
International shipping is available upon request. Additional fees may apply, excluding customs duties and local taxes.
TERMS
Because each panel is handcrafted to order, returns are only accepted in the event of a defect or damage noted upon delivery.
If this occurs, please contact us within 48 hours with photos, and we will work together to find the best solution. All return requests must be pre-approved by our team.
Installation Manual
Download Installation Manual
Download Layout Grid A4
Download Layout Grid A3
3D Models & Press Kit
Contact-us to access 3D files for your projects or to download our press kit.
